MICOAIR MG-F10-C L1+L5 DUAL BAND GNSS

Powered by the Neo-F10N with an all new L1+L5 dual band concurrent architecture.Designed for high reliability autonomous flight and precision navigation.

FEATURES:

L1+L5 DUAL-BAND: Effectively suppresses multipath interference and eliminates ionospheric errors.

IST8310 Compass: High performance magnetic sensor providing a stable heading reference.

High-gain Antenna: 38dB 4-arm Helix Antenna for rapid satellite acquisition and locking.

Sub-Meter Accuracy: 1.0m CEP positioning with concurrent four-constellation tracking.

Open-Source Firmware Support: Ardupilot(>=4.4.0),PX4 (>=1.14.0).

Hot Start Support: Integrated supercapacitor for secondry positioning fixes in seconds.

SPECIFICATIONS:

• GNSS Receiver: UBX NEO-F10N

• Compass: IST8310

• Concurrent GNSS: GPS/QZSS, Galileo, BeiDou, NavIC

• GNSS System Support:

  • GPS/QZSS L1C/A (1575.42MHz), L5 (1176.45MHz)

  • Galileo E1-B/C (1575.42MHz), E5a (1176.45MHz)

  • BeiDou B1C (1575.42MHz), B2a (1176.45MHz)

  • NavIC SPS-L5 (1176.45MHz)

  • SBAS (EGNOS, GAGAN, MSAS, WAAS)

• Frequency Band L1: 1575.42MHz

• Frequency Band L5: 1176.45MHz

• Max Navigation Rate: 10Hz

• Positioning Accuracy: 1.0m CEP (CEP50%, 24-hour static testing, -130 dBm satellite signal strength, with more than 6 satellites for each satellite system)

• Toggle Speed: Cold start 28s, Hot start 2s

• Hot Start Support: Equipped with backup battery and supports hot start

• Sensitivity:

  • Tracking & Navigation: -167dBm

  • Re-capture: -159dBm

  • Hot start: -159dBm

  • Cold start: -148dBm

• Height Limit: ≤ 80,000m

• Speed Limit: ≤ 500m/s

• Acceleration Limit: ≤ 4g

Connectivity and Physics

• UART Baudrate: 38400 (Chip Default), 115200 (Factory Default)

• Output Level: 3.3V TTL level

• Output Protocol: UBX-PVT (Factory Default)

• FLASH: Power off can save parameters

• Working Current: 30mA@5V (without antenna), 55mA@5V (with Antenna)

• Working Voltage: 5V

• Working Temperature: -40°C ~ +85°C

• Connector: GH1.25

• PPS LED: Blue (Solid ON after powering on); blinking (1Hz) when GNSS gets 3D fix

• Product Size: 29 x 44 x 14.7mm

• Antenna Size: 28 x 28 x 59.3mm

• Product Weight (without antenna): 13g

• Product Weight (with Antenna): 28g

PACKAGE CONTENTS:

• 1 * MICOAIR MH-F10-C L1+L5 DUAL BAND GNSS