MICOAIR NxtPX4v2 Stack

9,999.00 inc GST

In stock

Description

Specifications

  • MCU: STM32H743VIH6, 480MHz, 2MB Flash
  • IMU: BMI088+BMI088(DUAL)
  • Baro: SPL06
  • MicroSD Card Slot
  • 7x UART
  • 8x PWM
  • 1x I2C
  • 1x SPI
  • 1x SWD
  • 2x ADC (VBAT, Current)
  • USB Type-C
  • BEC 5V 2.5A output (for controller, receiver, GPS, optical flow or other devices)
  • BEC 12V 2.5A output (for video transmitter, camera)
UART Mapping(Ardupilot)
  • SERIAL0 -> USB
  • SERIAL1 -> UART2
  • SERIAL2 -> UART4
  • SERIAL3 -> UART1 (GPS)
  • SERIAL4 -> UART3 (DJI-O3)
  • SERIAL5 -> UART7 (ESC Telemetry)
  • SERIAL6 -> UART5 (RCIN)
  • SERIAL7 -> UART8
UART Mapping(PX4)
  • TELEM1 -> UART2
  • TELEM2 -> UART4
  • TELEM3 -> UART7 (ESC Telemetry)
  • SERIAL4 -> UART8
  • GPS1 -> UART1
  • GPS2 -> UART3
  • Radio  Controller -> UART5 (RCIN)
RC Input
The default RC input port supports SBUS and CRSF protocol.
Set SERIAL6_PROTOCOL=23 on Ardupilot or set RC_INPUT_PROTO = Auto on PX4.
VTX Support
The SH1.0-6P connector supports a DJI O3 Air Unit connection. Pin 1 of the connector is 12v so be careful not to connect this to a peripheral requiring 5v.
PWM Output
The NxtPX4v2 supports up to 8 PWM outputs. Channels 1-8 support DShot.
Battery Monitoring
The board has a internal voltage sensor and connections on the ESC connector for an external current sensor input.

Compass

The NxtPX4v2 does not have a built-in compass, but you can attach an external compass using I2C on the SDA and SCL connector.

Physical

  • Mounting: 20 x 20mm, Φ3mm
  • Dimensions: 27 x 32 x 8 mm
  • Weight: 6.5g
  • 3D Model(stp)

NxtPX4v2 – Flight Controller – MicoAir Tech

NxtPX4v2 wiring diagram jpg

NxtPX4v2 Ports Top jpg

NxtPX4v2 Ports Bottom jpg

NxtPX4v2 package jpg

 

NxtPX4v2 package2 1 jpg

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery